Kalafo e babatsehang ea holim'a metsi White Aluminium Oxide Grit

Tlhaloso e Khutšoanyane:

Junda White aluminium oxide grit ke 99.5% ea boemo bo hloekileng ba mecha ea litaba e phatlohang.Ho hloeka ha mecha ena ea phatlalatso hammoho le mefuta e fapaneng ea boholo ba grit e fumanehang ho etsa hore e be e loketseng bakeng sa mekhoa ea setso ea microdermabrasion hammoho le litlolo tsa boleng bo phahameng tsa exfoliating.

Junda White aluminium oxide grit ke seqhomane se bohale se tšoarellang nako e telele se ka phatlohang hangata.Ke e 'ngoe ea li-abrasive tse sebelisoang ka ho fetisisa ho phunya le ho lokisa holim'a metsi ka lebaka la litšenyehelo tsa eona, nako e telele le boima ba eona.E thata ho feta lisebelisoa tse ling tse atisang ho sebelisoa, lithollo tsa aluminium oxide tse tšoeu li phunyeletsa le ho khaola litšepe tse thata ka ho fetisisa le carbide e sintered.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Tlhaloso ea Sehlahisoa

Junda White aluminium oxide blasting media e na le lisebelisoa tse ngata tse fapaneng, tse kenyelletsang ho hloekisa lihlooho tsa enjene, li-valve, li-piston le li-blades tsa turbine liindastering tsa lifofane le tsa likoloi.White aluminium oxide e boetse ke khetho e babatsehang bakeng sa ho lokisetsa sebaka se thata bakeng sa ho penta.

Junda White aluminium oxide e na le silica e sa lefelloeng ea 0.2% kahoo e bolokehile ho sebelisoa ho feta lehlabathe.Boholo ba grit bo tsitsitse mme bo fokotseha ka potlako ho feta mecha e meng ea ho phatloha ha lehlabathe, e siea sebaka se boreleli.

Tekheniki Parameters

Litlhaloso tsa White Aluminium Oxide Grit
Mesh	Karolelano ea Boholo ba Karoloha palo ea letlooeng e le nyenyane, e ba mahoashe haholoanyane
8 Mesh	45% 8 mesh (2.3 mm) kapa ho feta
10 Mesh	45% 10 mesh (2.0 mm) kapa ho feta
12 Mesh	45% 12 mesh (1.7 mm) kapa ho feta
14 Mesh	45% 14 mesh (1.4 mm) kapa ho feta
16 Mesh	45% 16 mesh (1.2 mm) kapa ho feta
20 Mesh	70% 20 mesh (0.85 mm) kapa ho feta
22 Mesh	45% 20 mesh (0.85 mm) kapa ho feta
24 Mesh	45% 25 mesh (0.7 mm) kapa ho feta
30 Mesh	45% 30 mesh (0.56 mm) kapa ho feta
36 Mesh	45% 35 mesh (0.48 mm) kapa ho feta
40 Mesh	45% 40 mesh (0.42 mm) kapa ho feta
46 Mesh	40% 45 mesh (0.35 mm) kapa ho feta
54 Mesh	40% 50 mesh (0.33 mm) kapa ho feta
60 Mesh	40% 60 mesh (0.25 mm) kapa ho feta
70 Mesh	45% 70 mesh (0.21 mm) kapa ho feta
80 Mesh	40% 80 mesh (0.17 mm) kapa ho feta
90 Mesh	40% 100 mesh (0.15 mm) kapa ho feta
100 Mesh	40% 120 mesh (0.12 mm) kapa ho feta
120 Mesh	40% 140 mesh (0.10 mm) kapa ho feta
150 Mesh	40% 200 mesh (0.08 mm) kapa ho feta
180 Mesh	40% 230 mesh (0.06 mm) kapa ho feta
220 Mesh	40% 270 mesh (0.046 mm) kapa ho feta
240 Mesh	38% 325 mesh (0.037 mm) kapa ho feta
280 Mesh	Bohareng: 33.0 - 36.0 micron
320 Mesh	60% 325 mesh (0.037 mm) kapa ho feta
360 Mesh	Bohareng: 20.1-23.1 micron
400 Mesh	Bohareng: 15.5-17.5 micron
500 Mesh	Bohareng: 11.3-13.3 micron
600 Mesh	Bohareng: 8.0-10.0 micron
800 Mesh	Bohareng: 5.3-7.3 micron
1000 Mesh	Bohareng: 3.7-5.3 micron
1200 Mesh	Bohareng: 2.6-3.6 micron

Ptsela lebitso	Thepa e Tloaelehileng ea 'Mele						Proximate Chemical Analysis
Aluminium oxide Grit e tšoeu	Mmala	Sebopeho sa lijo-thollo	Crystallinity	Ho thatafala	Matla a Khoheli a khethehileng	Boima ba Bongata	Al2O3	≥99%
	Bosoeu	Angular	Crystal e Khōlō	9 Mohs	3.8	106 lbs / ft3	TiO2	≤0.01%
							CaO	0.01-0.5%
							MgO	≤0.001
							Na2O	≤0.5
							SiO2	≤0.1
							Fe2O3	≤0.05
							K2O	≤0.01